Heat Transfer Fluid Selector
Fill in what you know — blank fields are ignored.
50 matching products
Fill in any field on the left and results update instantly. All products are shown by default.
Service range
-85 ~ 60℃
Max film temp
—
Pour point
-130℃
Viscosity
0.6 mm²/s (0.6 mm²/s @25℃)
High-purity (>99%) fluorinated fluid with no flash point, non-flammable, chemically and biologically inert, high dielectric strength — for semiconductor test & packaging, server immersion cooling and EV battery testing.
Cross-reference: 3M Fluorinert FC-72 · Novec 7100
Service range
-85 ~ 70℃
Max film temp
—
Pour point
-130℃
Viscosity
0.6 mm²/s (0.6 mm²/s @25℃)
High-purity (>99%) fluorinated fluid with a slightly higher boiling point than HFP-03; no flash point, non-flammable, inert and highly insulating for chip testing, server immersion cooling and battery testing.
Cross-reference: 3M Fluorinert FC-77 · Novec 7100 · Novec 7200
Service range
-115 ~ 175℃
Max film temp
210℃
Pour point
-135℃
Viscosity
0.721 mm²/s (40℃)
Ultra-low pour point and viscosity synthetic heat transfer fluid with excellent low- and high-temperature fluidity, ideal for ultra-low temperature liquid phase and rapid heating/cooling cycles.
Cross-reference: Therminol VLT
Service range
-80 ~ 315℃
Max film temp
345℃
Pour point
-75℃
Viscosity
0.78 mm²/s (40℃)
Wide-range fluid with a pour point below -110°C and service up to 315°C — the go-to choice for integrated hot/cold systems.
Cross-reference: Therminol LT · Dowtherm J
Service range
-20 ~ 300℃
Max film temp
—
Pour point
-15℃
Viscosity
1 mm²/s (40℃)
Low-boiling aromatic two-phase fluid for -20 to 300°C, dedicated to spinning boxes and texturing machine heat boxes.
Cross-reference: Dowtherm J
Service range
-100 ~ 220℃
Max film temp
—
Pour point
-110℃
Viscosity
1 mm²/s (9 mm²/s @-40℃；<20 mm²/s @-60℃；<50 mm²/s @-80℃)
Ultra-low temperature synthetic fluid with a pour point below -100°C: low cold viscosity, efficient heat transfer, covering -100 to 220°C for rapid heat/cool cycling in low-pressure systems.
Cross-reference: Syltherm XLT
Service range
-85 ~ 230℃
Max film temp
—
Pour point
-90℃
Viscosity
1.2 mm²/s (40℃)
Ultra-low temperature fluid with pour point below -100°C, suited to -85°C reactions alternating with mid-range heating.
Cross-reference: Therminol D-12
Service range
-2 ~ 330℃
Max film temp
—
Pour point
-10℃
Viscosity
1.5 mm²/s (40℃)
Low-boiling synthetic fluid from -2 to 330°C for pressurised liquid-phase high-temperature duty; benchmarked against Therminol VP-3.
Cross-reference: Therminol VP-3
Results are computed from typical datasheet values and are indicative only. Please confirm with a Chemie engineer.